Not fuel proof.
Pack includes:
- Two packs of the 25g 2 metre long x 1.1 metre wide Ultra Lightweigh Glass Fibre Woven Cloth.
or
Two packs of the 49g 2 metre long x 1.1 metre wide Super Lightweight Glass Fibre Woven Cloth. - 500ml of Bucks-Single Part Coating System (Gloss or Semi-Matt Finish).
- 1 Bucks Synthetic Coating Brush 1"
- 2 coating Squeegee applicator card.
- 1 60ml Pot.
- 1 pair of Surgical Gloves.
- Brushes and Tools can be washed off in warm soapy water.
- Avoid contact with eyes and skin, wear suitable gloves and eye protection.
- Suitable for use with lightweight glass cloth for covering model boats & model aircraft.
- Single-part and doesn’t attack foams white, pink or blue.
- Foam Friendly, single-part no mixing required, dries hard & clear.
- Self Levelling Properties and very long working time.
- Not fuel proof.
- Not as strong as Epoxy Resin Coating.
- Makes a good base layer with glass fibre woven cloth for painting foam models.
- Acrylic paint ok.
- Cellulose paint not suitable.
- Waterproof.
- Full strength can be over 8 weeks.
- Low Odour & easy to use.
Shake bottle before use.
When covering a foam surface, sand the foam smooth then cut the glass fibre woven cloth to size and lay on the foam surface. Now wet out the cloth with the Bucks Single-Part coating system with a coating brush or a roller then leave for 2 hours to dry before applying another coat. Repeat the process until the required finish is achieved.
Please select glass fibre woven cloth weights: 25g (1.1 metre wide) or 49g (1.1 metre wide) & finish from the menu below.
This kit contains the following free of charge a brush, 2 spreader cards & a pair of surgical gloves.