Not fuel proof.
Pack includes:
- One pack of the 25g 2 metre long x 1.1 metre wide Ultra Lightweigh Glass Fibre Woven Cloth.
or
One pack of the 49g 2 metre long x 1.1 metre wide Super Lightweight Glass Fibre Woven Cloth. - 250ml of Bucks Single-Part Coating System (Gloss or Semi-Matt Finish).
- 1 Bucks Synthetic Coating Brush 1"
- 1 coating Squeegee applicator card.
- 1 60ml Pot.
- 1 pair of Surgical Gloves.
- Brushes and Tools can be washed off in warm soapy water.
- Avoid contact with eyes and skin, wear suitable gloves and eye protection.
- Suitable for use with lightweight glass cloth for covering model boats & model aircraft.
- Single-part and doesn’t attack foams white, pink or blue.
- Foam Friendly, single-part no mixing required, dries hard & clear.
- Self Levelling Properties and very long working time.
- Not fuel proof.
- Not as strong as Epoxy Resin coating.
- Makes a good base layer with glass fibre woven cloth for painting foam models.
- Acrylic paint ok.
- Cellulose paint not suitable.
- Waterproof.
- Full strength can be over 8 weeks.
- Low Odour & easy to use.
Shake bottle before use.
Use our super special 1.1m wide 25g or 49g glass fibre woven cloth for covering model wings when the orientation of fibres are layed at +45 degree angle or -45 degree angle which will increase the torsional stiffness.
When covering a foam surface, sand the foam smooth then cut the glass fibre woven cloth to size and lay on the foam surface. Now wet out the cloth with the Bucks Single-Part coating system with a coating brush or a roller then leave for 2 hours to dry before applying another coat. Repeat the process until the required finish is achieved.
Please select glass fibre woven cloth weights: 25g (1.1 metre wide) or 49g (1.1 metre wide) & finish from the menu below.
This kit contains the following free of charge a brush, 1 spreader card & a pair of surgical gloves.
