Use the Bucks 2" roller for applying activated epoxy resin and hardener or Single-part coating system to Ultra / Super lightweight glass fibre woven cloth on model planes.

2" resin foam rollers for use with the 2 inch resin roller handle.

Rollers cannot be cleaned after use if used with activated epoxy resin.

Rollers can be cleaned with warm soapy water if used with Single-Part coating System.

Note: We recommend the use of rollers for applying activated epoxy resin to Ultra or Super lightweight woven glass fibre cloth on model aircraft wings and fuselage to prevent dragging the glass fibre cloth. Depending on the quantity of the activated epoxy resin applied to glass fibre woven cloth with a roller, may need the surplus activated resin removed with absorbent paper (toilet tissue roll) to save weight of the model. In the pre-cured state of the activated resin the absorbent paper does not stick and can be peeled away from the model easily before the curing process. Remember surplus resin is only going to add weight to the model so must be removed and only leave enough of the activated epoxy resin to stick the woven glass fibre cloth to the model.

Not recommended for use on heavier weights of glass fibre woven cloths.

Please select quantity of the rollers from the menu below.