High strength coating for models.
Pack includes:
- Two packs of the 25g 2 metre long x 1.1 metre wide Ultra Lightweigh Glass Fibre Woven Cloth.
or
Two packs of the 49g 2 metre long x 1.1 metre wide Super Lightweight Glass Fibre Woven Cloth. - 700g of epoxy resin L285 and hardener 285,
- 1 pair of Gloves,
- 1 1" Brush
- 2 spatulas,
- 2 measuring containers,
- 1 epoxy resin spreader cards.
The 4 metre pack is available in two weights of woven glass cloth 25g and 49g.
25g glass fibre woven cloth, Ideal for models upto 70" wingspan or upto 10lbs all up weight.
49g glass fibre woven cloth, Ideal for models over 70" wingspan or over 10lbs all up weight.
Foam Friendly.
Use our super special 1.1m wide 25g or 49g glass fibre woven cloth for covering model wings when the orientation of fibres are layed at +45 degree angle or -45 degree angle which will increase the torsional stiffness.
Note: We recommend the use of rollers for applying activated epoxy resin to Super or Ultra lightweight woven glass fibre cloth on model aircraft wings and fuselage to prevent dragging the glass fibre cloth. Depending on the quantity of the activated epoxy resin applied to glass fibre woven cloth with a roller, may need the surplus activated resin removed with absorbent paper (toilet tissue roll) to save weight of the model. In the pre-cured state of the activated resin the absorbent paper does not stick and can be peeled away from the model easily before the curing process. Remember surplus resin is only going to add weight to the model so must be removed and only leave enough of the activated epoxy resin to stick the woven glass fibre cloth to the model.
This kit contains the following free of charge a brush, 1 spreader card & a pair of surgical gloves.
