The kit contains:

  • Laminating Epoxy Resin L285 and Hardener 285, 150ml Combined Volume,
  • Glass Fibre Reinforcing Tape 100mm (4”) Wide / One Metre Long, 225gsm,
  • one epoxy resin spreader card,
  • one ½" brush,
  • two 25ml graduated mixing pots,
  • two spatulas, 
  • one Pair of surgical gloves,
  • a full set of instructions for joining a wing on model aeroplanes and gliders.

This kit is very useful for repairs to model Boats, Planes and Glider mouldings. Also good for other items that need repairing & reinforcing.

Once the resin and hardener is mixed then put into a tray (larger area) to prevent heat build up, this will give you a longer pot life / working time (50 minutes). The cure time is 24 hours at room temp.

The Resin and Hardener is also Foam Friendly.

Wing Joining & Repair Kit instructions


Product Safety Data
Note: We are closed until 24 June 2024: checkout is disabled until then.