Categories

Model gliders

  • Nimrod MRA4

    Here is a customers PSS Nimrod MRA4 built using Bucks-Composites materials.

  • Phil M's Phase 6

    Though you might be interested in a pic of my completed Phase 6 finished in your formula 50 resin, excellent finishing method, I am very pleased with the final result

  • John D's Phase 6

    Here is a well built Chris Foss Phase 6 Glider which has been fully glassed using Bucks-Composites materials covering system.

  • Covering

    Here is a model glider wing that one side has been covered with the Bucks-Composites materials system and the other side has not been covered with the Buc

  • GB's glider

    Here is a glider that has been glassed using Bucks-Composites materials system.

  • Steve's Glider

    Here is a photo of one of Steve's gliders flown up at the Dyke on a windy day. The glider is built using Bucks-Composites strong epoxy resin and reinforcements.

  • Seagull

    The Seagull is complete with a poop tank! Built using Bucks-Composites.

  • Catalina

    Here is another of Steve's gliders flown up at Mill hill and built using Bucks-Composites materials.

  • Steve's gliders

    Here is a few more of Steve's gliders which have used Bucks-Composites in the building.

  • Steve's Hawk PSS

    The Hawk PSS is built using Bucks-Composites Materials and is flown up the hill.

  • GB's 8th glider

    My 8th glider is this one, this glider got court in a thermal up at the Dyke and I put it into a dive but it wouldn't pull out.

  • Scale glider

    The scale glider is flown up the hill and built with Bucks-Composites materials.

  • Steve's Mustang

    The Mustang on low flypass, another of Steve's planes and built using Bucks-Composites materials.

  • Glider

    Up the hill and built with Bucks-Composites.

  • Eddie the Eagle

    Eddie the Eagle always has fun flying with the other birds! Bucks-Composites materials are used to build the Eagle.

  • Glider

    These gliders have been built using Bucks-Composites materials.

  • Minimoa

    The Minimoa has the fuselage and various parts reinforced with Bucks-Composites materials.

  • Glider

    This glider has the wings, fuselage and tail reinforced with Bucks-Composites materials.

  • Steve's Reno-racer

    The Reno-racer is another of Steve's plane's, built with Bucks-Composites materials. Concord also built with Bucks-Composites.

  • Eagle

    Up the hill you never know what is going to turn up! Built using Bucks-Composites materials.

  • Dyke

    Steve a regular model pilot up at the Dyke and uses Bucks-Composites materials in most of his pss gliders for building or repairing.

  • Steve's Glider

    A great slope soaring day, glider built using Bucks-Composites materials.

  • BOB CAT

    Here is a model that has used Bucks-Composites materials in the building.

  • Eddie's Sonata

    This glider is built from a plan and has the fuselage covered with Bucks-Composites materials.

  • Eddie's Phase 6

    The Phase 6 is built from a Chris Foss kit and is fully glassed using Bucks-Composites materials system.

  • JB's Mini Pilatus

    This glider has the wings, tail and rudder covered with Bucks-Composites materials system.

  • Eddie's Middle Phase

    The Middle Phase is built from a Chris Foss kit and is fully glassed using Bucks-Composites materials system.

  • GB's Composite Apache

    Bucks-Composites materials has been used for moulding the fuselage and covering the wings, ailerons, tail & fin. This glider is awesome to fly!

  • Eddie's Valley Hawk

    The RAF Valley Hawk is scratch built and the Bucks-Composites materials system was used to finish the Hawk.

  • GB's Airtech Glider

    The Airtech Glider has been covered with the Bucks-Composites materials system.

  • GB's Super Strong Dart

    The Dart glider has the Bucks-Composites materials system used to cover the wings and V-tail.

  • Steve's PSS Hawk

    Hawk PSS Built using Bucks-Composites materials Epoxy Resin and Glass cloth.

  • Steve's Glider

    4 metre Olympia Glider 2b built from a Cliff Charlesworth plan.

  • Olympia 463

    Here is a photo of my machine on which I have used your glass and epoxy systems. The photo is of my Olympia 463 to 1:3.5 scale.

  • Jim's Glider

    Glider is fully glassed using Bucks-Composites materials system. The glider is scrach built and fly's very well.

  • GB's 4 metre Vega

    Here is my Pat Teakle Vega glider, the Vega 4 metre wings, tail & rudder are covered with Bucks-Composites materials Super lightweight glass fibre cloth and epox