My first radio controlled attempt at flying with a Micro-Mould Planet which had an Enya engine fitted.
Model planes
Here are just a few model aircraft that have all been covered with the Bucks-Composites materials covering system.
I am sending some photos of 2 models covered in your glass fibre cloth. The 109 was fully covered in cloth and the 163 had the wing, elevons & fin glass clothed. The fuselage is plastic.
I am a fan of Bucks-Composites.
Enclosed are some glassing photos of my Boulton Paul P-120 mock up.
This is one of Colin's planes that has used Bucks-Composites materials to cover the model. The wingspan is 120" and length is 94".
Tempest scale 1-4.5 span 110" engine Moki 250 5 cylinder, weight 38lbs, built from scratch no plans.
Chipmunk 1/3 scale
11ft 4in span, fus, fin, tailplane & cowl all glassed with Bucks-Composites materials
Engine Quadra 75 model weighs 22Kg.
B17G, 10ft span, 30lb built from plans and entirely covered with Bucks-Composites materials ultra lightweight glass fibre cloth and Epoxy resin and Hardener.
Turbo Raven - although petrol powered!
Finished in Bucks-Composites materials glass cloth and resin. Span is 96", power is a Moki 75cc and weight is about 32 lbs.A new cowl was made for the Ryan PT22 from Bucks-Composites materials woven glass cloth and epoxy resin.
The Hercules Fully glassed using Bucks-Composites materials system, the wingspan is 12 ft.
The Lancaster Fully glassed using Bucks-Composites materials system, the wingspan is 17 ft.
The B25 Mitchell Fully glassed using Bucks-Composites materials system, the wingspan is 10 ft.
The Gloster E28/39 ‘Whittle' has Bucks-Composites materials used on Fuselage and on parts of the wing.